Brand:Sony, Product:Digital Camera, Model: SLT-A65, Firmware: 1.03, OS: Mac OS X. Sony SLT-A65 Camera Firmware 1.03 Mac OS X was collected from Sony official site for Sony Digital Camera. In order to ensure the right driver download, Official driver links from Sony are listed at first. If the official driver can not be downloaded, a copy of official driver can be provided at local server download.opendrivers.com, download1.opendrivers.com, or dl2.opendrivers.com.
Besides, Both the driver developer's home page and driver download and support page be provided as well in my page. Sony SLT-A65 Camera Firmware 1.03 Mac OS X.
Improvements after firmware upgrade:. 1.Support flash control function for Micro Twin Flash Kit, HVL-MT24AM. 2.Improved response time of the following operation, - Switching the screen mode between the LCD monitor and the electronic viewfinder, - Front and Rear control dial, - Fn button control. 3.Other functional improvement. Firmware Download and Update Procedure: Step 1: Reset your camera to the default settings:. 1.Select Menu - Setup - Initialize on the camera.
2.Select Reset Default. 3.Select OK. 4.Wait more than 10 seconds. (Do not care wether the LCD screen of the camera turns off, or not). 5.Remove the power source ( battery or AC adaptor ) from the camera. 6.Attach the power source ( battery or AC adaptor ) back to the camera.
Step 2: Download the firmware updater:. 1.Make sure that you are logged on as a user with administrative rights.
2.Download the UpateSLTA65V103.dmg firmware file. 3.Save the file to the desktop of your computer (recommended). Step 3: Start up the Firmware Updater:. 1.Close all currently running programs on your computer. 2.Double-click the UpateSLTA65V103.dmg file you downloaded.
Do not connect the camera at this point. 3.Double-click the UpateSLTA65V103.dmg icon which appears on the Desktop. 4.Double-click the FirmwareUpdater icon.
5.To load a kernel extension, the message prompts you to allow the application to make changes. Type the password for the administrative account. 6.Firmware Updater starts up. 7.According to the instruction on the Firmware Updater window, select Menu - Setup - USB Connection on the camera, and check if Mass Storage is selected. If another mode than Mass Storage is selected, please select Mass Storage. 8.Connect the camera to the computer with the supplied USB cable. Note: When the camera is connected to the computer, the LCD screen of the camera turns off.
Niresh Mac OSX Yosemite 10.10.1 DVD ISO Overview Niresh Mac OS X Yosemite 10.10.1 is Appleās desktop and server operating system with an elegant design which will give you a fresh new look. The recipe manager (free version download for mac windows 10.
Please proceed to the next step. 9.After confirming the above, click Next on the Firmware Updater window. 'Check the version' appears on the Firmware Updater window, and 'Follow computer instructions' appears on the LCD screen of the camera. If 'Follow computer instructions' does not appears on the LCD screen of the camera, please disconnect the USB cable from the camera, and proceed to the 'Recovery procedure' detailed at the below.
Note: From now on, never turn off the camera until the firmware update is completed. 10.After confirming the screens on Figures 1 and 2, click Next.
The current version and the version after the update appear on the lower left part of the screen. 11.After confirming Current version is Ver.1.02, click Next. If Current version is Ver.1.03, the update is not required. According to the message, stop the USB connection and click Finish.
Turn off the camera, remove the battery pack and/or the AC adapter, reinsert the battery or reconnect the AC adapter and turn on the camera. 12.The screen 'Reset camera' appears. 13.Press the center of the multi-selector to execute the reset of the camera. Note: The screen turns off when the soft key is pressed. Please proceed to the next step. 14.After resetting, reconnection of the camera is verified, and the screen 'Run the update' appears. 15.Click Run to start the update.
The progress bar appears while upgrading (approximately 5 minutes). Note:Never turn off the camera nor disconnect the USB cable while upgrading. 16.When the update is completed, the screen 'Finish the update' appears. Click Finish and disconnect the USB cable.
![]()
17.Turn off the camera, remove the battery pack and/or the AC adapter, reinsert the battery or reconnect the AC adapter and turn on the camera. Step 4: Confirm the firmware version of your camera is Ver.1.03:.
1.Select Menu - Setup - Version on the camera. 2.The firmware version is displayed as illustrated below. Recovery procedure - If the USB connection was not successful, please follow the below instructions:.
1.Turn ON the camera. 2.Press the MENU, Play and MOVIE buttons simultaneously. 3.While Pressing these buttons, turn OFF the camera. 4.Release your fingers, and wait over 30 seconds. 5.Press the MENU, Play and MOVIE buttons simultaneously again. 6.While Pressing these buttons, now turn ON the camera.
7.Release your fingers.
Brand:Sony, Product:Digital Camera, Model: SLT-A33, Firmware: 2.00, OS: Mac OS X. Sony SLT-A33 Camera Firmware 2.00 Mac OS X was collected from Sony official site for Sony Digital Camera.
In order to ensure the right driver download, Official driver links from Sony are listed at first. If the official driver can not be downloaded, a copy of official driver can be provided at local server download.opendrivers.com, download1.opendrivers.com, or dl2.opendrivers.com. Besides, Both the driver developer's home page and driver download and support page be provided as well in my page. Sony SLT-A33 Camera Firmware 2.00 Mac OS X.
This utility updates the SLT-A33 camera firmware to version 2.00 and provides the following benefits:. Adds the function to use 'Picture Effect' modes. Adds the ability to assign often used features to the D-RANGE button. Adds a new mode to turn off display parameters.
Improves menu operability. Enables the use of wireless High-Speed Synchronization with applicable external flash units.
Htc wildfire driver for mac. Adds a digital level gauge function when using an optional external monitor such as the CLM-V55 Clip-on LCD Monitor. More details about benefits provided by firmware update release notes. This update is only for SLT-A33 cameras that currently have a firmware version 1.10 or lower. If your camera firmware version is already Version 2.00, this update is not necessary. Check the version of your camera firmware:.
1.Power on the camera. 2.Press the Menu button.
3.At the 'Menu' screen, select 'Setup'. 4.At the 'Setup' screen, select 'Version'.
5.The firmware version is displayed on the LCD screen. Download and Update the Firmware:. 1.Download the SLT-A33V2Update1105a.dmg file to a temporary or download directory (please note this directory for reference). 2.Go to the directory where the file was downloaded and double-click the SLT-A33V2Update1105a.dmg. Note: Do not connect the camera to the computer yet.
![]()
3.On the desktop, double-click the SLT-A33V2Update1105a icon. 4.Double-click the 'Firmware Updater' icon. 5.At the Password prompt screen, enter the Name and Password for the administrative account, and then click 'OK'.
6.Connect the camera to your computer using the supplied USB cable. Note: The LCD screen on the camera will turn off when it is connected to the computer. 7.At the 'Firmware Updater' window, click 'Next'.
WARNING!!: Do not power off the camera or disconnect the USB cable until the update process is complete. 8.When the updater recognizes the camera connection, the camera screen displays the message, 'Follow computer instructions.' . 9.At the 'Firmware Updater' window, click 'Next'. 10.When 'Prepare the camera for the update' screen is displayed, check the version number at the lower left. If the current version is 'Ver.1', click 'Next'.
Download Sony Nex-6 Digital Camera Firmware 1.03 For Macbook Pro![]()
Note: If the current version is 'Ver.2', your camera does not need this update. Stop the USB connection, click 'Finish', then remove the battery or disconnect the AC adaptor briefly, and then power on the camera again. 11.When 'Reset the camera' screen is displayed, press the center button of the Control Wheel to reset the camera.
Note: Do not disconnect the USB cable from the camera or the computer. 12.At the 'Firmware Updater' window, click 'Next'. 13.When 'Run the update' screen is displayed, click 'Run'. Note: The update process takes about four minutes to complete.
WARNING!!: Do not power off the camera or disconnect the USB cable until the update process is complete. 14.When 'Finish the update' screen is displayed, click 'Finish'. 15.Disconnect the USB cable, power off the camera, then remove the battery pack or AC adapter.
16.Reconnect the battery pack or AC adapter and power on the camera.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |